Bionix® HP Knee
Swanson Regional Orthotic
& Prosthetic Research Center has developed the
RapidFit Method to improve patient care for lower limb
amputees.
The Swanson
designed Bionix®
HP Knee
is a high
performance, smooth-action, single axis knee joint.
The knee frame, which pivots on
precision roller bearings, is constructed of high
strength, lightweight aircraft grade aluminum. The Bionix® HP works with the CaTech Swing or the Swing &
Stance Hydraulic units which are easily accessible
with this unique frame geometry.
The Bionix® HP Knee is designed with a four-bolt pattern for
alignment adapters. It may also be directly bolted to
a socket attachment block to minimize the thigh
length. Optional knee cap available (reference
part #308).
Recent Advertisement
Three
Lifestyles - One Knee
| Demonstration of Quad
Band and HP Knee in use while running
|
|
